Ultra-low flat structure
An innovative Flat Structure design holds a 110 mm vertical profile along the entire length — 200 mm with the hinged frame kit — for compact, high-density layouts.
30°–45° MERGE
Click the image to zoom
Conveyor Modules · Induction platform
TYPE 9070
Roller Merge
Inserting module that induces parcels onto the collector conveyor.
The Roller Merge Type 9070 is a high-strength and dependable inserting module designed for modern sorting plants that require precise and consistent parcel induction onto collector conveyors. A solid roller conveyor base is enhanced with a dedicated transmission system, protective structures and a reinforced support frame — delivering repeatable merge behaviour at up to 2 m/s, in left- or right-hand configuration, at merge angles of 30° to 45°.
3 widths
650 – 1,050 mm
30° – 45°
Merge angles
2.0 m/s
Max merge speed
LH / RH
Working directions
≤67 dBA
Noise level
50 kg/m
Transport load
Key differentiator
A rigid roller platform on a reinforced support frame, with its own transmission belt group — the merge point holds its geometry under continuous induction load rather than drifting out of alignment.
Built rigid
A roller platform that holds its geometry
The 9070 is built on a solid roller conveyor base carried by a reinforced support frame, with integrated sideguard protection from a minimum height of 150 mm. Three standard working widths of 650, 850 and 1,050 mm are available in left- or right-hand configuration, so the merge point can be set on either side of the collector line without a bespoke frame.
- 650 – 1,050Working widths (mm)
- Min 150Sideguard height (mm)
- LH / RHWorking directions
Consistent induction
Precise merging, shift after shift
A dedicated transmission belt group drives the rollers independently of the collector line, so induction stays consistent as upstream flow varies. Merge angles from 30° to 45° suit both tight plant layouts and gentle high-speed inductions, at speeds up to 2 m/s and a transport load of 50 kg/m — all at a noise level of ≤ 67 dBA, and compliant with the CE Machinery Directive and ISO/EN safety standards.
- 2.0 m/sMax merge speed
- ≤67 dBAEmpty, constant speed
- 30° – 45°Merge angles
Model 9071 specifications
Technical detail
| Specification | 650 mm | 850 mm | 1,050 mm |
|---|---|---|---|
| Available standard working width (mm) | 650 | 850 | 1,050 |
| Side guard height h (mm) | 0–600 | 0–600 | 0–600 |
| Thickness T (mm) | 110 | 110 | 110 |
| Outside dimension (mm) | 750 | 950 | 2,350 |
| Belt stripes quantity | 9 | 12 | 15 |
| Conveying height H (mm) | Min 300 | ||
| Belt stripes width (mm) | 60 | ||
| Merge angle | 30° – 45° | ||
| Transport load | 50 kg/m | ||
| Belt speed | Maximum 2.7 m/s | ||
| Noise level (empty, constant speed) | ≤ 70 dBA | ||
| Belt material | 2-layer & antistatic (Ammeraal / Habasit); flame-retardant option available | ||
| Compliance | CE Machinery Directive · ISO/EN safety standards | ||
Add the hinged frame kit and the vertical profile becomes 200 mm. Transport load refers to an evenly distributed load along the conveying surface. All dimensions in millimetres unless stated. Specifications subject to change without notice.
High modularity & flexibility
Three standard working widths from 650 to 1,050 mm, side guards from 0 to 600 mm and merge angles of 30° to 45° adapt the platform to each layout.
Unified drive concept
One drive logic across the platform delivers efficient product positioning and consistent flow management, even under demanding operating conditions.
Enhanced maintainability
The hinged frame kit and accessible belt stripes make routine service a scheduled task rather than a line shutdown, cutting maintenance interruptions.
Robust construction
A robust frame structure carries the optimised belt architecture, holding geometry and alignment through continuous merge and diverge duty.
Proven long-term reliability
Built on more than three decades of material-handling expertise, at ≤ 70 dBA and compliant with the CE Machinery Directive and ISO/EN safety standards.
Airport baggage handling systems
Merging and diverging luggage flows inside tight structural envelopes.
Parcel & postal sorting centres
Precise lateral product redirection at high line rates.
Distribution & logistics hubs
High-capacity merge/diverge sections of automated conveyor lines.
Space-restricted sorting plants
Layouts where installation height and system density are critical.
Technical datasheetPDF · on request
CAD / STEP model3D · on request
Products cataloguePDF · full range
Datasheets and CAD models are supplied on request — send us your project details and our engineers will share the documentation for your configuration.
Combine freely
Related conveyor modules
Every module shares one frame logic and drive concept — build the 9070 into a complete line.
TYPE 9015
Conveyor Modules
Belt Conveyors Gappex
Gap-control conveyor setting the spacing the merge needs upstream.
View product
TYPE 9008
Conveyor Modules
Belt Conveyors CHD
The collector conveyor the merge inducts onto, in five working widths.
View product
TYPE 9083
Conveyor Modules
High Density Line Splitter
The inverse of the merge — splits a dense flow into multiple lines.
View product
TYPE 9022
Conveyor Modules
Flat Vertical Sort Diverter
Compact 600 mm diverter redirecting the flow downstream of the merge.
View product
Talk to our engineers
Enquire about the Roller Merge 9070
Tell us your working width, merge angle, hand and induction rate — we'll return the right configuration, datasheet and CAD for your line.
- Reception+39 02 991 996 1
- Sales office+39 02 991 996 313
-
Fax+39 02 991 996 300
- Email[email protected]
- Visit usVia C.A. Dalla Chiesa, 74/76 · Paderno Dugnano (MI)
Monday – Friday · 9 AM – 6 PM CET
Request a quote — Type 9070
Form area — add your Elementor / WPForms widget the CSS class msy-form-source and it will be pulled into this panel.